If you have a fire or water emergency, please call us now at (618) 533-5400

To have the optimal experience while using this site, you will need to update your browser. You may want to try one of the following alternatives:

Fire & Water - Cleanup & Restoration

Fire & Water Damaged Insulation Removal

4/19/2018 (Permalink)

We Know How To Remove Smoke Damaged Insulation

SERVPRO of Marion, Bond, Fayette, Clinton Counties thinks outside the box when it comes to creative ways to get the job done. Here, we engineered a way to continually extract all the insulation out of the attic with minimal manipulation and manpower of an assisted living center. 

Smoke and Soot Facts:

  • Hot smoke migrates to cooler areas and upper levels of a structure.
  • Smoke flows around plumbing systems, seeping through the holes used by pipes to go from floor to floor.
  • The type of smoke may greatly affect the restoration process.

Different Types of Smoke:

There are two different types of smoke–wet and dry. As a result, there are different types of soot residue after a fire. Before restoration begins, SERVPRO of Marion, Bond, Fayette, Clinton Counties will test the soot to determine which type of smoke damage occurred. The cleaning procedures will then be based on the information identified during pretesting. Here is some additional information:

Wet Smoke – Plastic and Rubber

  • Low heat, smoldering, pungent odor, sticky, smeary. Smoke webs are more difficult to clean.

Dry Smoke – Paper and Wood

  • Fast burning, high temperatures, heat rises therefore smoke rises.

Protein Fire Residue – Produced by evaporation of material rather than from a fire

  • Virtually invisible, discolors paints and varnishes, extreme pungent odor. 

Call us at (618) 533-5400 for all your cleanup needs.

Other News

View Recent Posts